工程圖轉PDF線寬設定

 工程圖轉PDF線寬設定

準備pentable.pnt的檔案

! Pen 1 = white entities (object lines)

! Pen 2 = yellow entities (text, dimensions, cross hatching)

! Pen 3 = gray entities (hidden lines)
! Pen 4 = red entities (Highlight – Primary (Dark Red)Selected (Red)Secondary Selected (Orange) All items plot as solid lines:
! Spline surface grid (does not plot in drawings)
! Pen 5 = green entities (sheetmetal)
! Pen 6 = cyan entities (section)
! Pen 7 = dark gray entities (dimmed e.g. tangent edges)
! Pen 8 = blue entities (spline surface grid) [use for drawing perimeter border in format]

pen 1 thickness .010 cm; color 0.0 0.0 0.0
pen 2 thickness .018 cm; color 0.0 0.0 0.0
pen 3 thickness .018 cm; color 0.0 0.0 0.0
pen 4 thickness .050 cm; color 0.0 0.0 0.0
pen 5 thickness .035 cm; color 0.0 0.0 0.0
pen 6 thickness .018 cm; color 0.0 0.0 0.0
pen 7 thickness .008 cm; color 0.0 0.0 0.0
pen 8 thickness .050 cm; color 0.0 0.0 0.0

注意 pentable.pnt 的文字也要打進去，類似下面的圖。
在設定PDF要使用pentable的參數，pdf_use_pentable 設為Yes

https://creoqa.com/2015/01/13/creo-3-0-%E5%B7%A5%E7%A8%8B%E5%9C%96%E8%BD%89pdf%E7%B7%9A%E5%AF%AC%E8%A8%AD%E5%AE%9A/